PDA

View Full Version : Keling Products

  1. Keling motors & drives
  2. Testing oz in.
  3. Help with Power Supply
  4. Keling KL34-150-90 DC Motor
  5. Driver question about CW/CCW mode available (optional)
  6. Tod Deleted
  7. Kl23-120-36
  8. I purchase the KL-4030, 3 stepper package
  9. Warranty?
  10. A thanks to John and the Keling crew
  11. Keling 5056 driver setup
  12. KL-4030 and 425oz-in
  13. Which resolution setting best for my stepper?
  14. Another A+ rating.
  15. New Servo with ground wire
  16. There is this faint vibrating/hissing/humming feels to my stepper motor. Why?
  17. Just ordered my kit
  18. Newbie Questions
  19. Torque Speed Curve
  20. Keling Inc. KL-8056 Drivers
  21. New package with ncPod USB Card
  22. Gear head for Size 34 motors
  23. Wiring help
  24. Wiring done,firing up the system
  25. Am I sending enough amps to the motors?
  26. Keling router on E-bay
  27. CNC package
  28. KL-4030 Driver Info - wiring help needed!
  29. KL-11078 driver + KLH2120-42-8B stepper
  30. KL34H2160-62-8B stepper motor / drw dual shaft size ?
  31. KelingInc and Mach3 trouble
  32. KL5056 runs one way only
  33. Kelling servos used on Rutex drivers
  34. Keling power supply?
  35. new to CNC
  36. KL34-150-72 (3 wires) to gecko ?
  37. ventilation of power supply?
  38. Loosing steps
  39. KL-4030 driver vs Xylotex as far as performance?
  40. Website not available
  41. Mill/Drill conversion
  42. Dip Switch configuration
  43. Keling motors, drivers and power supply connections
  44. Some Better Keling Documentation
  45. 425 oz. Motors 5056 Drivers and new PSU
  46. Does Keling have ANY support?
  47. Keling 5056 Driver Error HELP
  48. 425 wiring
  49. KL-7220 power supply
  50. 4 wire 495oz wiring to 4030 driver
  51. think i made an error in my order
  52. motors not operating properly
  53. trying to hook my first motor
  54. would like to get connection info for the 6050
  55. Keling Support
  56. as anybody bought the keling 6050 driver here
  57. Feedback for Keling products
  58. Need Help! KL-4030 WITH GECKOS C1G BOARD WIRING HELP
  59. KL-8056 drivers
  60. Keling 640oz for Z-Axis
  61. Keling Steppers Price Increase ???
  62. 3 axis controller from Mr. Doerr
  63. Recommended wire size for hookup
  64. Placed an order and PayPal got the wrong shipping address
  65. Breakout board - power light indicator?
  66. KL23H2100-30-4B Motor info needed
  67. Keling Customer Service is THE BEST!
  68. Limit switches?
  69. E-STOP help needed
  70. Ready to use and plug
  71. Wiring keling steppers to FET 3 board..HELP
  72. Keling CNC Spindle
  73. Wiring up motors drivers and break out board
  74. Problem Wiring confusion
  75. Newbie Current and Voltage Calculations -Check Please?
  76. Keling stepping driver
  77. Recommended PSU for a 4-axis setup?
  78. stepper motor size?
  79. Problem no motor movement???
  80. Need Help! What cable between KL-5056 and 425oz?
  81. Keling drivers trippled the speed/power of my machine!
  82. NEW DC SERVO Controller with G320
  83. New 3 Axis or 4 Axis Stepper controller
  84. New CNC ROuter and Engraving Machine
  85. What sized keling stepper on RF30 clone?
  86. 4030 and breakout board
  87. Need Help! 5056 red light
  88. Newbie Please verify -Opinions welcome.
  89. Grounding question!
  90. steppers jerky
  91. CNCmachines6090 GOOD OR NO GOOD?
  92. OK, Got Keling Controller and Motors, Have some questions.
  93. Wiring help needed: KL-8078 - PMDX-122 - KL34H2120-42-8A
  94. 5V Question
  95. NEW G540 4 Axis Package
  96. Options with ordering a Keling Controller kit..
  97. 4 Wire Keling Steppers Confusion
  98. Distributor for Europe?
  99. my conversion pics
  100. Need Help! KL-4030
  101. Newbie questions about Keling KL23H276-30-4A
  102. Bridgeport CNC
  103. Servo problems
  104. Need a higher rated PS, but will it make a lot of difference?
  105. Need Help! Stepper motors on all axes twitches every 2 seconds.
  106. 4030 Kellinger driver settings
  107. Enable signal on KL-4030 bad?
  108. Newbie stepper voltage
  109. Motors reversing randomly....
  110. Pulse Width
  111. Is it OK to change DIP switches on a 4030 while powered?
  112. Brand New CNC Machine Probe
  113. New 3 Axis Stepper Motor controller
  114. Need Help! Keling 4030 losing steps?
  115. High Precision Planetary Gearbox
  116. Need Help! E-Stop Switch
  117. New Machine Build Satisfaction with the 4030
  118. Need Help! Losing steps, smooth jogging, choppy running.
  119. New Machine Build 600in-oz servo motors ?
  120. 48v power supply makes 65v
  121. Limit switch help
  122. Need advice regarding stepper selections
  123. Two steppers for one axis? How?
  124. Sale Promotoion
  125. NEW G540 Kits
  126. KL-B25 or C11g Breakout board?
  127. Need Help! 425 oz Stepper Wiring
  128. Questions Wiring Up Servo/Gecko
  129. My motors are getting pretty hot...
  130. Newbie KL-8078 and KL23H276-8B
  131. temperature max motor stepper
  132. Out of Stock: KL23H284-35-4B
  133. motor speed
  134. Connecting KL-11078 to PC-2-Route
  135. Need Help! new machine build
  136. Problem Encoder mounting
  137. Keling/Leadshine Quiet drives
  138. Dimensions for a Kelling 12.5A 48V power supply?
  139. Newbie How many Steps/rev.(for 1.8°motor)?
  140. Newbie stepper motor wiring
  141. Need Help! Servo System ?
  142. Problem KL- 7220 Power Supply Blowing Fuses
  143. Servo Encoder Count in Mach3
  144. new motor
  145. Questions on 387 motor specs
  146. Power supply KL-150-24 24V/6.3A
  147. Support.
  148. Keling 4030 C10 Wiring help.
  149. Problem DB25 Wiring??
  150. New Machine Build Keling Products...What do you think??
  151. NEW ATC SPINDLE
  152. Newbie The Joke Is On Me!!
  153. Fuse for 5010 power supply
  154. Where do Keling products ship from?
  155. Upgrade
  156. Could this be true?
  157. 5 volt positive and negative??
  158. 2 questions??
  159. CNC router on special sale
  160. New 4 axis G540 controller
  161. Keling Documentation Help Please!!!!
  162. Newbie Warming problem with motors KL23H286-20-8B
  163. Microstep Resolution plus lead screws to config in mach3...
  164. 425oz motor tuning
  165. Pin 1 KL-DB25 Breakout Board?
  166. Comments on Keling KL-6090?
  167. Keling cnc NEMA 23 Servo package experience
  168. ROUTER TABLE MODIFICATION
  169. Need Help! Driver and Breakout board troubleshooting
  170. dissatisfaction
  171. motor step counts
  172. Viper 75/95 servo drives support
  173. KL-6050 5v for $50
  174. Red FAULT light on Gecko 320
  175. Information needed
  176. C11g Powered from computer power supply
  177. c11g vfd direction control
  178. 425oz motor runs hot
  179. Keling 1HP AC Nema 34 Servos
  180. Keiling motors and G540 connections Help
  181. help to choose between KL-6050 and KL- 4030
  182. KL- 5056 OR THE KL-6852
  183. Choosing the right Keling kit for my mini-mill.
  184. Need Help! wondering about Keling servo feedback cables?
  185. Adding a 4030 Driver to the 3-Axis Controller
  186. Newbie C11 Wiring
  187. Keling Nema 23 3 axis pack question
  188. Procrastination got the better of me
  189. Keling Motors and Ajax