Need Help! Trimming angles in Alphacam.


Results 1 to 3 of 3

Thread: Trimming angles in Alphacam.

  1. #1
    Registered Alexsandr's Avatar
    Join Date
    Aug 2017
    Location
    Russian Federation
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Trimming angles in Alphacam.

    Trimming angles in Alphacam.

    I can not solve the problem with constrained parametric angles in Alphacam.
    For the drawing, I'm using 3d polylines. To draw the path of the tool by which it will rise and fall in the corners. Without use work planes.
    I can not understand how to draw in the axes in work planes.
    Are there other ways to indicate the path of the instrumen- tation so that it rises and falls in the corners. In Artcam there is a function "Trimming an angle" when engraving. In Alphacam, I have to manually draw the path of the tool on the corners. It turns out that something like a closed rectangle with sharp outgoing rays raised up to the desired angle in 3D polylines. It's very tiring to draw. In cconstrained parametric, these corners are stretched incorrectly.
    How to draw such angles in axes in work planes or there is another way to solve?
    To parameterize a workpiece drawing.
    Thank you




    Similar Threads:
    Attached Thumbnails Attached Thumbnails Trimming angles in Alphacam.-screenshot_2-png   Trimming angles in Alphacam.-screenshot_1-jpg   Trimming angles in Alphacam.-screenshot_3-png  


  2. #2
    Member Maroslav4's Avatar
    Join Date
    Apr 2015
    Location
    Czech Republic
    Posts
    327
    Downloads
    7
    Uploads
    0

    Default Re: Trimming angles in Alphacam.

    You can use 3D engraving in Alphacam. It make result as you want.



    Last edited by Maroslav4; 08-14-2017 at 02:43 PM.
    Postprocessors, VBA macros, .NET programming.
    www.ccsoftcz.com


  3. #3
    Registered Alexsandr's Avatar
    Join Date
    Aug 2017
    Location
    Russian Federation
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Trimming angles in Alphacam.

    Thanks for the response. Tomorrow at work I'll test. While I solved the problem with the help of constrain and manually editing the tool path by points



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Trimming angles in Alphacam.

Trimming angles in Alphacam.