Did you recieved also some error during generate NC code? Which version Alphacam you use (newest)? 32 or 64 bit?
Hello everybody!!!
We have at work a PADE CNC that uses an OSAI controller. Generating codes is not a big deal when using the old Alpacam V7, it creates two types of files; the first, a file with extension .Prg and some others with .anc.
Example of .Prg file:
Example of .anc file (the OP01-01.anc specified above):Code:F1 T,N2,R9000,t02.002,M1,U2 P,X198.428,Y375.492,Z80,A0,b0,C0,F0,G200,m110000,o0 I,OP01-01,.\Projects\3401MA - BASE\OP01-01.anc,S0 T,N3,R9000,t03.003,M1,U3 P,X6.337,Y278.925,Z80,A0,b0,C0,F0,G200,m310000,o0 I,OP02-01,.\Projects\3401MA - BASE\OP02-01.anc,S0 P,X157.5,Y-13.075,Z80,A0,b0,C0,F0,G200,m310000,o0 I,OP03-01,.\Projects\3401MA - BASE\OP03-01.anc,S0 P,X339.862,Y253.636,Z80,A0,b0,C0,F0,G200,m310000,o0 I,OP04-01,.\Projects\3401MA - BASE\OP04-01.anc,S0
The problem is that when I try to use a newer version of Alphacam it only generates an almost blank .Prg file, with just one line:Code:; ; G1 X0 Y0 Z-60 F4000 G2 X-28.428 Y-27.492 R28.4443 F2000 G3 X-182.6 Y-294.46 R178 X125.743 Y-294.46 R178 X-28.428 Y-27.492 R178 G2 X-60.652 Y1.462 R32.4078 G1 Z0 F300000 G1 X0 Y0 Z-70 F4000 G2 X-28.428 Y-27.492 R28.4443 F2000 G3 X-182.6 Y-294.46 R178 X125.743 Y-294.46 R178 X-28.428 Y-27.492 R178 G2 X-60.652 Y1.462 R32.4078 G1 Z0 F300000 G1 X0 Y0 Z-82 F4000 G2 X-28.428 Y-27.492 R28.4443 F2000 G3 X-182.6 Y-294.46 R178 X125.743 Y-294.46 R178 X-28.428 Y-27.492 R178 G2 X-60.652 Y1.462 R32.4078 G1 Z0 F300000
I don't know what is causing this, but having to use an old version of Alphacam is not an ideal solution for me.Code:F1
Can anyone help me sorting this out?
Similar Threads:
- Need Help!- Post Processor Used To Work?
- Newbie- Educational Versions work with CAM / CNC?
Did you recieved also some error during generate NC code? Which version Alphacam you use (newest)? 32 or 64 bit?
Postprocessors, VBA macros, .NET programming.
www.ccsoftcz.com
Have 32 need 64 post processor.