Need Help! Alphacam 2003 / Bretoncam


Results 1 to 2 of 2

Thread: Alphacam 2003 / Bretoncam

  1. #1
    Registered
    Join Date
    Apr 2017
    Location
    United Kingdom
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Alphacam 2003 / Bretoncam

    Good Morning,

    First post so hopefully i'm posting in the right place.

    We use Alphacam / Bretoncam, Bretoncam loads Alphacam and injects macro's and extra menus into Alphacam.

    We are now getting a "Key Not Correct For This Module" error, this is coming from Alphacam.

    - The Alphacam version that came bundled with Breton was ALPHACAM03.
    - The dongle is a blue DK2 parrellel port dongle.
    - When you unplug the dongle it detects the dongle is not present and shows a different message.
    - You can open Alpha-edit with the dongle plugged in with no errors.
    - i've tried a fresh install on another computer and get the same error message "Key Not Correct For This Module".
    - We Have licenses for Alphacam 2016/2017
    - Alphacam can not send us a replacement dongle for that version.
    - Tried Bretoncam with Alphacam v7 and doesnt seem to work.
    - I have Alphacam coming in to quote on setting up Alphcam 2016/17 directly for the machine skipping out Bretoncam.

    For me all this point to the dongle being faulty so...

    - Any one have a Alphacam 03 parallel dongle for Standard Marble?
    - Any one offer any advice on what to do?

    Thanks
    Martin.

    Similar Threads:


  2. #2
    Member Maroslav4's Avatar
    Join Date
    Apr 2015
    Location
    Czech Republic
    Posts
    327
    Downloads
    7
    Uploads
    0

    Default Re: Alphacam 2003 / Bretoncam

    This version is too old, so i think that will be problem get this key. Also i think that on newest version Windows it is not possible run this. Solution can be fix macro for Alphacam for newest version. Or make a postprocessor directly for your machine without Bretoncam (as you wrote).

    If you contact me i can try help you.

    Postprocessors, VBA macros, .NET programming.
    www.ccsoftcz.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Alphacam 2003 / Bretoncam

Alphacam 2003 / Bretoncam