Yes, but your tool table needs to match if he has an ATC.
If someone who doesn't use Alphacam or the same machine as me were to send me the post for their machine could I load it into Alphacam and output one of my programs for them to use on their machine?
Sent from my iPhone using Tapatalk
Similar Threads:
- Solved huanyang vfd not outputting voltage
- Outputting File
- outputting height offsets
- Need Help!- NX6 Probing and outputting
- Need Help!- Outputting to USB or MDI
Yes, but your tool table needs to match if he has an ATC.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
you can ask them to send you their tool library