Reply with QuoteVery easy - look here (sorry for the language - it's not in English - but You can localize the function at the same places in your system)
2014-06-12_1201 - Lisbeth_B's library
Two questions about moving geometries and machining operations
I am new on AlphaCAM ,meet a lot of questions during learning the basic operations.
1.I know that Geometries can be moved or copied from Flat-Land plane to another plane.How can I move or copy Geometries from workplane to Flat-Land plane?
2.How to add another new Geometry into an existing Operations(such as 3D Engraving)? For example,there is a 3D engraving operation on a letter"A",can I add another letter"B" into this 3D operation?
Similar Threads:
i'm very interesed in the manchine and this en form .but my english is very poor .so i only read posts most time
Re: Two questions about moving geometries and machining operations
Very easy - look here (sorry for the language - it's not in English - but You can localize the function at the same places in your system)
2014-06-12_1201 - Lisbeth_B's library
