Post for Busellato Easy Jet 7.1

[RaZeaLZA]

Hi Guys,

I'm looking for a AlphaCAM or Cabinet Vision post for the Busellato Easy Jet 7.1. The problem is that the CNC runs 2 programs. Wave/Maestro and Xilog Plus.

Any help would be greatly appreciated.

Regards,

Willem Steyn

Similar Threads:

• Using a post to output to multiple work offsets - Very Easy!
• Need Help!- enroute post to Busellato Jet 200
• GGCad easy to use 2.5 CNC post-processor