I originally posted this as a reply to another thread, sorry about that.
Here is the problem.
I have been building an Ajax Retrofit on a Bridgeport series 1 with and a SJ100 Inverter. I have most every thin done but am getting quit confused with the Inverter manual. I follow the Ajax Schematic an my hookups are this.
T1 L on Logic side
L1 to Spin Encom
CW 1 on Logic Side
CCW 2 on Logic side
Analog Out L Analog Side
Analog Com 0 Analog Side
The Spindle motor will run from the Run command on the inverter but nothing
when I press the start on the control pendant.
Am I missing some setting on the Inverter?
If any of you have done this with success I would appreciate your help.
What did you do?