Reply with QuoteYaskawa V1000 or Automation Direct GS3 (if no spindle orientation required)
Yaskawa A1000 or Delta VFD-VE (if spindle orientation is required)
Which VFD's do you prefer?
I'm curious to know what brand and model VFD's you guys prefer to use with the Centroid controls for lathes and mills?
Marty
Similar Threads:
Re: Which VFD's do you prefer?
Yaskawa V1000 or Automation Direct GS3 (if no spindle orientation required)
Yaskawa A1000 or Delta VFD-VE (if spindle orientation is required)
Re: Which VFD's do you prefer?
The AD GS3 seems reasonably priced. Do you have a "cheat sheet" you use to program it and connect it up to the AIO DC (as a starting point)Originally Posted by cncsnw
Marty
Re: Which VFD's do you prefer?
GS3 setup cheat sheet.
http://www.centroidcnc.com/dealersup...ploads/203.pdf
and load meter setup with oak or allin1dc
http://www.centroidcnc.com/dealersup...ploads/296.pdf
Re: Which VFD's do you prefer?
Thanks Keith! Good to have....
Marty
