Do you mean the machine can't go as fast as you want, or the displayed feed rate is too slow.
If the latter, just add the feedrate to your g-code, ex: F50
Put it in the first line before motion starts.
The demo has no limitations.
Unless you're talking about motor tuning. If that's the problem, the demo is limited to 25000 steps per second.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |