I want to also change from my 4x 48V 7.5A(output) PSUs to one or two larger PSUs (on a project I have yet to finish...)
I have 4x 900W(peak) Servos that this will be suppling power to through DMM-Tech control gear.
I haven’t talked to the Hui at DMM-Tech for a while but will pose the question to him as well, but thought it would be good to put it up here with your post as well.
Note: he was meant to give me three of these PSUs but gave me 4, which still seems underpowered for the system, I don’t want one axis to be underpowered at any one time while waiting for the others to move….
I am a little rusty on this power conversion as haven’t been working with it for a long time (project has been put on hold far too long), and was wondering which side to keep constant in the upgrade, the amps or the volts or does it matter at all?
Cheers |