1) Imo, not enough power.
2) Possibly, but hard to find. Also would be very easy to break, and chips can get packed pretty tight in a 1/8" slot 3/4" deep.
3) I can't tell you exactly what they are specing, but if there is no backlash, you should be able to do what you want no problem. A round nose tool would work best for that.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |