We just brought a Rover 20 NC 410 on the floor for evaluation and are not sure we are going to retrofit it. However, we run a Thermwood C50 with Galil controller / Camsoft package and One CNC Mill XR for Cam.
WE recently added an air drill on the Thermwood and drive it as follows ;
Piggy back of on of our two Z axes, Fired with M codes using offsets to avoid crash between Z head and drill. In our code, the drill is basically a head driven on a common axis ; Router = T1, drill = T3, driven with all standard G codes. It really was rather easy to implement and works great.
Any tips on the NC 410 would be appreciated ....
__________________
Pierre |