 Help!!!!!! | |
Hello,
I need help with a Crusader M. I have a Republic Lagun with this control. I was running the machine last week and all the servos die at once. I call a CNC repair guy when he checked it out he said the power supply that changes the 110 to 24 volts was bad. He replaced it but the servos still will not fire up. He charged me $600 and left. I found that the Z axis is not reading on the screen and a couple of times we got a red light on the Z axis drive card. A bit more to the story, before it quit and for sometime now the CTR screen would go blank. When it was on it was bright but, now it is very faint and does not want to light up. You have to tap on the cabinet to get it to flash. The X and Y are reading and we switch the plugs for the X and Z on the board in the controller. The Z axis would read when I moved the X but the X would not move when I moved Z. I really need this machine and like it but I am not a repair person when it comes to controls. Can anybody help me. |