[ARB]

I have a 94 VF3 that i recently puchased for my home shop. There are a couple of things that I can't quite get to the bottom of.
1.) When calling a macro with setting 75 on the machine refuses to go into single block mode. I am trying to get the machine to keep the spindle running at the end of a program to save time at the start of the next cyle.

2.) Along the same lines as a number 1 I can't seem to get the machine to turn the spindle on while it is moving from it's park position to the first operation. This is supposed to be possible but I havn't figured out yet.

Thanks for any input.