X-1 A21.1361 Y6.1475 F50.1597
X-1 A21.1388 Y6.1472 F50.1595
X-1 A21.1416 Y6.1470 F50.1597
just snipit of the code we run
this would carve a 2 inch cylinder in our machines
the code is close to 5,000 lines though
as you can see i tis only moving a few thou
for each point along y which is layed out as a
vertical axis x is horizontal and A is rotary
it doesn't make pretty squares though almost we have tried
it isn't what it was ment for with a 5/8 x 11" carbide cutter it makes
short work of foam though |