hi abasir
I’ve tried to do this before but think that I need to get a high reading between pins 2, 9 but don’t know how to get it into a high state.
with a volt meter, the - lead on signal ground (5)
This is what I got
Pin,
1 0.01v
2 0.00v
3 0.66v
4 0.26v
6 0.04v
7 0.66v
8 0.01v
9 0.02v
And I know this is not right, as I didn’t even get 1volt. And I can not compare it to my main desktop computer as it doesn’t have a serial port just usb. Perhaps the port is completely blown?
I’m on the look out for an old computer instead of using a laptop any way, this will just speed the search up.
Any help greatly appreciated
jm |