I know that not all fanuc controls do it this way.
But at least half would be a btter statment from me.
As the last few years that most of the controls the customers keep telling me that they have to add 20 to the D value and that it can not be the same.
I know that the Yasda 5axis that has a Fanuc 16i control does not have to have a diffrent D as I have mentioned.
But most of the older ones do like the OM, 6M and many more have it this way.
So I have to do this again today and say I am sorry for a over statment.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |