Originally Posted by Jim Seyller  I can e mail you an operations and programing manuals in a pdf. I worked as a technical support person for Harig Products in Elgin Il. for severial years, I know EZ Surf machine very well. I will help you with preventative maintenance tips and I also have severial contacts for parts, you may e mail me you phone number I would be more than happy help you with you Harig Grinder questions. Looking forward to helping you.
Jim Seyller
P: 847 683 0476
jdsserv@aol.com |
I just picked up one of these brand new but been sitting for a long time.
Looks like the battery on the mother board is dead. When we power it up and point to the hard disk #1 it seems to go to the EZSurf software but then it comes up with "NO BMDC, DESKTOP' HIT ENTER" and then thats it. It doesn't seem to power up the servo drives or the hydraulics.
I have the manual and I can copy software if it can help anyone.
John