The problem is definitely the fact that a person would have several different sizes to contend with. Normally from 6" x 12" to a full 24" x 36". There are times when doors and drawer fronts are bigger and smaller, but that is rare. And in those instances, one could deal with them in other ways.
Alot of the European Style cabinets only use a 1/8" reveal between the doors. With that tight of reveal and doors so close to each other, I think a good eyes would notice much more than a 1/32" variance. Thus the accuracy.
jderou
I was origionally thinking a gear racked system, but have not found one to buy or build. Pics would be great - Either post them here or send to
junkmailacct@sbcglobal.net. This is a highspeed connection, so don't worry to much about file size.
The grid on the table idea sounds ok, but it is up to the operator to assure that everything is square and perfect. Which is fine, but really isn't much faster than just relocating the machine zero based on part size.
Thanks all, please keep the ideas coming.