You can't have duplicate axes on the same line. Nor duplicate G or M codes that are part of the same "group", like M05 and M03, or G01 and G02.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Last edited by Rekd; 07-25-2003 at 08:07 AM.
|