Hi there!
Is there any way to the eia/iso program communnicating with user?
Mazak FJV-20 / Mazatrol M-PLUS with eia/iso.
I would like to send text messages to display while the eia/iso program running.
I found NC alarm command:
#3000=21(HELLO-WORLD).
Its working, but it is break the operation
#3006=1(HELLO-WORLD).
ITs an optional stop, but in this case user need to press the start button again.
Generate NC warning? (Blue text)
Change the program name between two G codes?
Is there any other ways to send something to display?
Thank you!!! |