Hi,
I'm pretty ignorant when it comes to electronics, so I have a question about something I'm planning to do. I have a variable DC power supply that can output fixed DC +5V/3A, +12V/1A, -12V/1A, and variable 2.5-20V/2A. I would like to use this to test my Xylotex board before building my final enclosure which will use a different PS. Does it make sense to use the +5V line to power the logic on the board and the variable 2.5-20V line to power my motors?
I told you I'm ignorant when it comes to electronics!
TIA!