I try some code but it doesn't works. I find a way to do my pipe thread but it is not the best. I do it in G02 and I write a line for each fillet.
EXEMPLE FOR MY EXTERNAL PIPE THREAD:
G02X-.235I.235K-.086
X-.23425
G02X-.23425I.23425K-.086
X-.2335
G02X-.2335I.2335K-.086
.....
.....
My milling is a Toshiba Asahina Shibaura model BTS-100W 1992.
Next time I will code pipe thread, I want to do it correctly. At this time only G02 works, but it is long to code. I found some G33 code but it doesn't works, perhaps it's the letter that change from a CNC to an other.
The thread That I'll have to do often is 1" 1/4-11 NPT
Mario |