One option is assembling, or joining sections of 80/20 extrusion.
The only T slot table I know of, in metal, is from Techno Isel. They have a nice extrusion available in 16.5 inch widths, but it aint cheap. !00.00 a foot.
For small stuff, you can buy the milling tables from a tool store, or replacement Mini Mill tables from LittleMachineShop.com. Or of course try to snag a Bridgeport table off eBay.
For your gantry router, the stuff from 80/20 or Techno Isel would work nice.
__________________
Halfnutz
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
|