A4 model. Approx. 10.5 x 9 x 4 cutting area.
This one started as a prototype to see where things needed to be
sized and adjusted and hole placement. But it's really looking Great
already....
It's only about half done right now. Lots of time just looking at it
to see what & where anything may need changing. It's a little
smaller version of the A-10 machine. Not much, though.
Also, this one goes back to the more angular design that was
mentioned earlier, to possibly make bolting on add-on's easier or
whatever modifications someone may want to make.
It's a really GOOD Looking machine already. I think I want color
in the reinforcing side panels, and painting them a few colors is
going to be a problem to get it perfect, so I may go to some
high quality pressure sensitive labels in the future.
So far -So good with the A4. It's gonna be a Great machine...
John