Decided to finish my CNC machine this summer.
Size will be 8x4. Servos and control box I bought from Anoel. I hope to be making chips by the end of July.
This first pic is a cross section of the possible y-axis. The roller bearings are in purple.
Main frame is blue
Guide frame is in red
and supports in black
I didn't draw the face plate which will hold the router mount this is attached between the two black angle pieces.
X-Axis is the same style only the bottom red and black pieces won't be there. Should have a more complete drawing this weekend.
I would like to take this time to say thank you to everyone. I've been reading posts for the last 2 years on this site and the community is one of the better ones on the net.
-Matt |