here was my thoughts on the fan process,
with the table being 13' long divide it into 3 fan sections
have the fans strong enough to have the air cycled out of the area at least 6 to 8 times a minute but still be strong enough to have a filter or two
and then what about baffles for the sparks? no clue what so ever on that aspect other than those sparks might catch a filter on fire and i dont need that
i can figure out the cubic footage but i dont know how to figure out the resistance of the filter elements. this might sounds like over kill but my goal is to be able to have the doors cracked and not wide open in the winter. i really dont want this to be the "smoker project". by that i mean i dont want to have finally finished this project and realized that there was a better way to reach my goal and start all over again. i do that all the time with smokers but i can sell them, i dont want to have to sell the table and worry about competing with another person.
so now my fingers hurt, so any suggestions
thanks
bakerj99  |