Pausing in the middle of motion | |
Has anyone else ever had the problem with motion stopping in the middle of a G01 or G02/G03 line? My Mill does it occasionally, and my Wire EDM is doing it nearly constantly. If I hit ESC and select Continue on Path, it will resume. It makes unattended burning out of the question.
It seems like the slower the commanded speed (the wire machine is running less than 0.1 IPM), the more often it occurs.
The Wire and the Mill are being run from completely different computers, so I don't believe it is a hardware problem. I have a Galil 17xx in one and a 18xx in the other.
Any ideas? |