Hello.
I've been following this forum for a while and i'm going to try to build a machine. I'm going to follow JGRO's plans but making it a little larger.
I'm making the cutting field 42" x 38" x 5"
Materials:
3/4" birch plywood
1/2 - 10 acme screw
skate bearings
1-1/4" angle iron
1/2" gas pipe (z)
3/4" gas pipe (y)
1" gas pipe (x)
delrin adjustment blocks
Hobby CNC controller & motors
assotrted nuts, screws, washers
i'll try to post pictures. once i figure out how to reduce the file size so i can upload them.
all the machines i've seen on this forum are great. thanks to all for the info. this should be fun!!! |