Here is a nice example for those of you who are new to Onecnc, coming from a 2d background.
I wanted to use this as a simple tutoring tool to help jumpstart those newbies out there
Even though I bought Mill expert for 3D, I am trying to create 2D toolpath just for familiarzing myself with the software more.
As you can see from the attached file, I have a part with many internal cutouts. How can I chain each cutout and then apply one set of toolpath parameters to them? Or can I? So far. all I have been able to do is select 1 chain, then go through the operations manager to select the tool, depths, etc. Then I have to go back and pick the next one, go through the ops mgr again, etc etc. Seems cumbersome.
Am I missing something? I remember with the OncCNC Profile, I could select all the chains and then apply the toolpath parameters all at one time.
I may not be looking at this correctly. I feel kind of stupid, actually! For 3D, I have no problems (yet). Can you shed some light on what may or nor be a roadblock in my thinking and/or lack of understanding of the features of Mill Expert? |