Originally Posted by krustykrab I am not sure how to repond to feedback regarding my signature line, if I really need to at all. It's nothing more than a satirical Irish quote. |
You're right, no need... Satir and and irony is not for everyone. Sometimes I take it too seriously.
Originally Posted by krustykrab The banging that I hear is simply a result of poor drive controllers that cause the drives to rapidly change direction without any inclination to accelerate or decelerate prior to these directional changes. This only damages the thrust bearings and, in time, the ball screws. |
Just remember the "banging" is also showing up in your machined part, and taking a toll on the cutter as well, all adding up to lower feeds to compensate for poor control by your CNC machine.
Just some thoughts,