Originally Posted by cam1  Here's mine, works great.
regards |
I have edited this post hoping to get it work with my machine with Fagor 8055 controller, but I have one problem, because I don't know how and where to add a line in a post to get "start clearance" at the beginning of the NC code (see line N160 in 1000.pim). See atachments:
- 1000.pim shows how posted NC should look like
- 1009.pim is the NC which is posted with this modified post
- FAGOR_8055.pst is edited post which still needs editing
So as you noticed I only need a line N160 (in 1000.pim) to be posted with this post. If someone will please help me with this one or at least point me in the right direction! Thank you!
