Fadal control is designed that way... | |
Haven't you ever wondered why Fadal has not improved their control in so many years?
And now, they have released their new 104D control with so few improvements that customers demanded other options, why is that?
Does all that "banging" that happens on your Fadal controlled CNC machine hinder accurate motion, delivering poor quality parts and wearing out machine components?
Most guys who will read the above will say I must be talking about banging (your word) caused by chatter or dynamics that can be overcome by finding the right RPM and feedrate. I'll bet they don't have a Fadal control. G8, G9, M91, M94 All codes poorly designed by Fadal to improve a very poor CNC control. Those of us who have Fadals, end up trying everything, to get better results both in part quality and better tool life...
You just cannot succeed at this game. This game is rigged against you and you will only see hints of hope. I'm not suggesting a conspiracy out of Fadal, I'm convinced they just don't know any better...
I happen to like most of mechanics of the machine (VMC box ways, high RPMs, liquid cooled spindle and ball screws, affordable cost)... It just has the worst CNC control.
That can be remedied.
__________________
Scott_bob |