Originally Posted by SanduskyCabinet  One of my other plants just got an Amada CNC Punch machine and they are having a little trouble using it. They have a program that gives them an alarm code "Pitch 147". I cannot figure out what that is. And they are on the other side of the country. So I am looking for a list of the alarm codes for the Amada machine. Its not in the manual. I cant find it online. Im stuck with them until I can figure out what that alarm code means. Please help! Thanks!
Kevin
Sandusky Cabinets |
Hello Kevin,
I don't know what model Amada turret punch they are using, but my Vipros alarm list has alarm 147 listed as below:
Oops, I didn't see this was an old post until after replying. No big deal.
147 An excessive pitch is instructed for nibbling.
I imagine the program is trying to use an excessive pitch for the tool that is nibbling a profile etc. , so try reducing the pitch for that tool to a percentage of the tool length(say 75% etc. as I forget the actual recommended %) or smaller if that does not work.
I hope this helps, but seeing the actual g-code might help.