Yes, Al they do have enable lines, but I don't think too many people use them, as they are jumpered to ground when you get the board, so you can pretty much ignore them.
Charlie, send an email to Jeff at Xylotex. He can probably repair your board pretty cheaply. The Xylotex is very intolerant of miswiring. (removing a motor under power falls under this category.) Other than that, it's a great drive for the money. fwiw, the current model Gecko drives are just as intolerant, it's not exclusive to the Xylotex. The newer soon to be released Geckos will be better, but at a higher price. Much higher than the Xylotex per axis.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |