After thought I was wrong you can do what you want on Level 1.
By either drawing in 3D space a telling it to unroll or drawing it in 2d the telling it to roll it , on the first paramater page as you do a contour with axis sub in the "Y".
in about two weeks I will starting to cover all of the diffrent ways to do 4th in my Advance class.
This were I start.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |