This is something I made a few years ago to change drill cycles from standard peck to deep hole peck..
Instead of:
N170 G99 G83 X-.226 Y-.126 Z-.5672 R.1 Q.0785 F2.68
You would get something like:
N170 G99 G83 X-.226 Y-.126 Z-.5672 R.1 I.15 J.05 K.0785 F2.68
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |