I saw your other reference to the yahoo group, I tried the link but it didn't find it. I also tried a general search for "v2xt" from the yahoo search page and couldn't find it. I will try it again.........really want to see that file.
We are communicating directly with Hyperterminal and RS232. We are not going directly from the CAM software, but at this point just saving the posted gcode into a text file, then sending that text file to the machine via RS232.
After some trial and error, we were able to get the communication working. But I still need to see your attachment, as that will help me with the BOSS5.
Now - I think todays project will be getting the RS232 working on our 2 axis EZ Trak, that one has a fail to communicate message. Here we go again.
Thanks a lot. |