Gentlemen,
I don't see the post here, but I was notified that a customer inquired which resolution the Rutex drives like best. I use 500 line encoders, which gives 2000 steps/rev of the motor. Anything wll work. The drives do not care. 1000 lines is popular too. Keep in mind the speed you want the machine to move. Mach2 can only send out 45000 steps per second. The rutex drives can handle 100,000 steps. The 2000 series will handle 200,000 steps per second. I am hoping I have some to sell in about 3-4 weeks now.
Tom Eldredge
rutex LLC
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
|