First, thanks alot Superman for taking your time and replys.
Now lets see, Feedrates are posted as should be, it was just that i didnt bother put any there because im just testing. But i tried, and its like it should.
Same with the D0, it was specified in tools and i changed it. Posts it like it should.
So ive been messing more with the lead out settings and it just wont work. posts the damn x-10000 everytime...
In v9.0 i havent seen this happen..
If i try to not use the EXIT in lead in/ lead out it posts
N160 G40 X-14.975 R14.975
But im not satiesfied with this neather..=(
Why won't it just make a simple move in x and y like it does when it reads the G41 code?
I had no issues in mc9.0 after your help..
Is this a error in post processor or what do you think?
I have no experience working with post processors... |