Murphy,
We did receive your e-mail and we'll go over it before we meet with our boss later today. The version you have uses an old set of motion card drivers and we have to decide how best to update you.
It is important for you and others to know that we here in the tech dept and the receptionist are instructed to ask you who are so that we can provide proper support. We have thousands of customers dating back to the early 80's and what software they're using, how old it , what version it is and if they have a installer/dealer already helping them matters in what advice we give. The features and functions vary widely so our jobs are based providing specific advice proper for each situation.
We have some questions to ask you before we update you and we also can address some recent questions you posted. The version you will be getting will also increase the macro space in memory as stated in the post above and the advice we have to offer regarding running logic files like job files will give you unlimited application size with out large macros files or writing from scratch in
VB, unless you wanted to.
Tech Support
CamSoft Corp.
(951) 674-8100
support@camsoftcorp.com www.cnccontrols.com