Hello All
I have a Mori SL-7 B with a Fanuc 6 TB 1981 control.
I have been keeping this machine alive for over 20 years.
It has throne me for many loops in the past but this time I am stumped.
It comes up with a 401 servo when turned on. The power supply and all voltages check out. PRDY LED's on the volisaty controle units light for 3 seconds then go out. There are no other indacations. DIGN 707 bit 4 has a 1 = VRDY not ready. any Ideas?
Last edited by To-old for this; 02-26-2010 at 01:56 AM.
Reason: Spelling
|