I have a Boxford 240 that I bought after it was retrofitted but the guy blew the motor control board, he fitted an inverter into it and set it all up in Mach3 to control the spindle, X and Z and the inverter, however I have still not bought a motor for it, All works in Mach 3 and the wiring seems very easy, mail me if I can help. I have the old controler boards but the spindle one has a fried component on it.
j.c.freeman@btinternet.com
Also I have a Boxford 250 slant bed that is missing softwear. I have aquired a boxford 250 slant bed with internal bbc board, it has had a floppy fitted so I presume the roms on the board ar dead. There is a disk in the floppy drive and it tries to boot every time the machine is switched on then fails. Any help from anyone would be apreciated, maybe someone has the roms from a retrofit or softwear on 3.5 floppy. A circuit diagram would be a bonus in case I have to retrifit.
HELP, HELP,