Thanks for designing the boards Phil. I had to buy a laser printer to start making pcbs again. I got tired of doing the photocopy thing. The boards came out great when i did the toner transfer. So far i have no problems, but i haven't tried to run the board yet. I need to build the bob board as well so that i can start testing. I've got all the parts sourced now so i should be able to go from here.
Is the connection from the 7051 board at jp3 to the bob all i need. I'm assuming jp1 to be for full/half step and what about jp2 is this to select cw/ccw? What is EL for? Thats all i have any questions about. Other then that, very nice tight little boards.
__________________
Have a good one.
Dave |