Please help me to modify my post, please look at the NC sequence below:
I'm using Wildfire 3.0.
N1(NONE)>>>>How do I edit text in between() ?
T0101
G92S2000>>>>How do I change the G92 to G50 ?
G96S400M3
M8
>>>How do I add a work offset Gxx to this line ?
G0X5.638Z13.815
G95>>>>>>>>How do I get rid of this line or G95 ?
G1X4.521F.015
X5.314Z13.964
Z4.789
G2X5.512R.219Z4.6058
G0X9.512
M9
M5
How do I add a "G28 U0" at the end of the sequence.
Thank you for your help. |