Chuck,
I got word from a friend here about availability of stepper motors. I have and old HP printer... I'll check it out. As for those surplus things, we have them here. I just don't know what to get, specs etc.
No problem of getting stuff via mail order. Most of the stuff I use in my shop I order from the US...
Tryin to look for an inexpensive kit that would work for cutting and doing inlays prolly... The machine frame, prolly aluminum, I could make here and have the fixtures to my specs... it's the CNC hardware side that I'm lacking in knowledge and struggling to get by... need all the help out there...
Thanks,
Hadj |