The weather is warm enough now for me to work on the garage. Okay, it's still only 18F, but with an infrared heater and dressing up looking like a Michelin man, I can keep warm enough. :-)
The pictures show what I've done so far.
Ahren - How big are the holes that I should be drilling on the CRS rails? I was thinking of making them 3/8" instead of 5/16" to allow for adjustments I have to make them parallel to each other. Is 3/8" too big or too small?
Old workbench.jpg - This is what my workbench looked like before.
CNC Frame 1.jpg - I disassembled the workbench and lengthened its rails to 6 feet. The basic frame of the CNC is now put together. The 8020 sitting on top is not part of the frame. I was using that to make the rails of the frame parallel.
CNC Frame 2.jpg - The frame raised so I can tightened the bolts underneath. |