Originally Posted by ajv2803959 Only say that microchip in application notes AN822 make public code and schematic of an driver with microstepping and L298.
I am asking if will be cheaper Alans picstep driver with 2 LM18245 or microchip driver board with an L298
Comments
Thanks in advance |
The price is not the problem, as far as I could read. It is only about $4 and can drive two motors. The problem is the motors they can drive are not Stepper. :-(
I think you don't need to use the LM18245 in Alan's or similar boards if you don't want to microstep. :-)
Yoram