[Paul_S]

I customized the MasterCAM .PST file Fanuc format to a Fadal 1 format plus other things the other programer wanted.

I personally prefer the Fadal 1 format. The Haas mill uses a Fanuc format.

I switch between formats, it makes no difference to me. The Fadal format 1 requires less codeing - typing.

G54X-.----Y-.----Z1.G43H#D# (I place the D word here for tool comp)

versus

E1X-.----Y-.-----Z1.H# (The Fadal format one does not use the D word for tool comp, uses the H word)

Just simpler.